Maximum top load capacity 90kg (198.42lb)
Pan angle: 0-360°, tilt angle: -45°~-+45°
Pan speed 0.005°/s~15°/s, tilt speed 0.005°/s~7°/s
Preset positioning accuracy: ±0.1°
Double pitch worm and gear driving, electronic image stabilization and anti-loose design, self-lock after power failure, strong wind resistance, high stability.
256 subdivision design, smooth rotation at low speed.
Whole structure with PTA three-proofing coating, key component sealed with pure nitrogen, all weather design
Aviation circular connector design, easy for installation and maintenance.
Self-lock with memory after power failure, strong wind-resistance
RS485 or RS422 pan tilt control with Pelco P/D protocol
Support position feedback and absolute position
Anti-corrosion surface treatment and coating
Rated IP66 for dust and water ingress
BIT-PT890 is a very large size pan tilt head positioner with load capacity up to 90kg (198.42lb). Powered with DC48V and equipped with double pitch worm and gear, it features a minimum speed of 0.005°/s, electronic image stabilization, anti-loose technology, self-lock to make sure smooth and stable view for a long range surveillance. With IP66 ingress protection design and corrosion resistance surface treatment and coating, BIT-PT890 is a good choice for application in corrosive environment like the coast.
Model | BIT-PT890 |
Max. Load Capacity | 90kg (198.42lb) |
Load Type | Outdoor, top load |
Pan Angle | Continuous 360° |
Tilt Angle | +45°～-45° |
Rotation Speed | Pan: 0.005°/s~15°/s |
Preset Accuracy | ± 0.1° |
Programmable Presets | 255 |
Cruising Track | 8 |
Scan | 8 |
Coordinate Feedback | Support, coordinate query feedback (default)/real-time feedback |
Absolute Control | Support with Pelco D extended commands set |
Lens Preset | Support |
Lens Control Speed | Continuously adjustable zoom, focus speed |
Adaptive PT Speed to Zoom | Speed up while zooming out, slow down while zooming in |
Guard Location | Support with1 preset or 1 cruising track or 1 auto scan |
Power Failure Memory | Support, recover to PT position, scan/preset/cruising track movement before power failure |
Self-lock | Support |
Protocol | Pelco P/D |
Baud Rate | 2400/4800/9600/19200 bps |
Communication Interface | RS485 (Optional RS422) or RJ45 |
OSD | Support |
Transmission | Worm gear transmission |
Wiring/Interface | |
Pan Tilt Base | 100M Ethernet with RJ45 (4 wire, pass-through), 48V DC (2 wire), GND |
Pan Tilt Top | 100M Ethernet with RJ45 (4 wire, pass-through), RS485 P/T control (2 wire) 12V DC (2 wire), 24V AC/DC (2 wire), GND |
General | |
Operating Voltage | DC48V±10% |
Power Consumption | ≤150W |
Working Temperature( with heater) | -40ºC～+65 ºC (-40 ºF ~ 149 ºF) |
Working Humidity | 90±5% RH |
Storage Temperature | -40 ºC～+70 ºC (-40 ºF ~ 158 ºF) |
Protection Level | IP66 |
Material | Aluminium Alloy |
Weight | 25kg (55lb) |
Dimension (L×W×H) | 224×341×403mm (8.81x12.42x15.864in) |
Unit: mm
BIT-PT890 heavy pan tilt is powered with DC48V voltage, instead of AC or DC24V that other pan tilt units require.
Every BIT-PT890 heavy duty pan tilt positioner will be inspected thoroughly there times strictly according to our on-line working instruction book, and passes 24 hours aging test before delivered to our customer.
MoQ is 1 unit.
BIT-PT890 is a heavy duty pan tilt head designed to load very heavy camera housing with large zoom lens inside and usually applied in heavy wind situation like mountain, airport, or seaport for a very long range surveillance.
While the camera lens is at its maximum zoom to view or track a target a few miles away, a very low rotation speed of 0.005°/s will make sure that the camera view won’t move too fast and miss the target.
Also any slight instability of the pan tilt body caused by wind will cause a big image shake and affect surveillance operation, so BIT-PT890 is designed with image stabilization and anti-loose technology to minimize image shake.
Leave us Message
English
日本語
한국어
français
Deutsch
Español
italiano
русский
português
العربية
tiếng việt
ไทย
čeština
dansk
Svenska
