Blue Icon (Tianjin) Technology Co., Ltd.
Blue Icon (Tianjin) Technology Co., Ltd.

Products

Contact Us

Best Heavy-Duty Tripod For Remote Pan-Tilt Loads

When you set up a motorized gimbal on a tripod, along with a camera, telephoto lens, and protective cover, the total weight of the system already far exceeds that of a single camera. Often, even if the nominal weight-bearing data of the tripod leg tube is impressive, the gimbal base, quick-release plate or adapter attached to it may “drag the rear leg”. Whether this equipment can rotate steadily and properly cannot be determined by looking at a single nominal load-bearing figure.
If you want to choose the most suitable heavy-duty tripod for large security equipment, you have to keep a close eye on the specific matching plan: how the tripod supports the independent gimbal, and there are multiple things hanging on the gimbal. Take “Blueprint Zhichuang”'s products as an example. Their gimbals and cameras are installed separately, and they often need to be equipped with high-magnification monitoring cameras, thermal imagers and even laser equipment. When dealing with equipment with this structure, you must evaluate the support conditions layer by layer based on the actual assembly situation, and never generalize.

image.png

Which layer does the load-bearing parameter refer to?

The tripod, gimbal, and the load on it are actually components at different levels. There is no unified standard in the industry for so-called “heavy” load-bearing. The tripod tube, bowl mouth or flat bottom interface, gimbal body, quick-release plate and adapter plate, each ring has its own limit. The load-bearing capacity of the entire system follows the “barrel effect”, which is determined by the weakest link. Never directly regard the nominal load-bearing capacity of the tripod as the load-bearing capacity of all connectors.
When calculating weight, you need to look at the two sets of data separately. One group is the load that rotates along the gimbal axis, which includes the camera, lens, shield, fill light, adapter plate, and even the cables that move along; the other group is the total weight that the tripod has to carry. In addition to the pile of things in front, you also have to calculate the self-weight of the electric gimbal itself. If you only compare the weight of the camera to the weight of the tripod, you're missing out on a lot.
Moreover, the type of gimbal installed on the foot stand will directly affect the choice of adapter. The manual gimbal used for ordinary photography is adjusted by hand, but the remote electric gimbal is filled with drive motors, power supplies and control systems. The two are very different and cannot be easily interchanged just because they look similar.

The weight is the same, but the center of gravity and movement state will not change

Even if the total weight is exactly the same, a short and compact device, combined with a telephoto lens, a large shield and a bunch of offset accessories, has a completely different sense of pressure on the gimbal's motion axis. The farther the center of gravity of the equipment is from the axis of rotation, the greater the torque generated; if the load is biased to one side, the moment of inertia will also increase, which requires the motor to have more force when accelerating and braking.
This explains why, when looking at the maximum load-bearing capacity of the gimbal, it is necessary to consider both the center of gravity condition and the pitch angle. The rated load-bearing capacity given by the manufacturer at a specific center of gravity height must never be applied to all installation combinations. During installation, the center of gravity of the load should be as close as possible to the pitch axis, and front-to-back balance must be maintained. Once you change lenses, add shields, or add other accessories, the original balance is disrupted, and you must reassess your center of gravity, balance, and torque.
For electric gimbals that require back-and-forth scanning or frequent forward and reverse rotation, static load-bearing is only the first hurdle to pass. The dynamic factors such as how fast the equipment needs to run, how much acceleration it needs, how frequently it needs to start and stop, how long the working cycle needs to be, and even how much wind resistance it has outdoors are even more critical. You should know that the “maximum load”, “maximum speed” and “maximum acceleration” marked by the manufacturer often have boundary conditions, and these three limit values are usually impossible to reach at the same time under the same working conditions.
The rigidity of the supporting structure will also directly affect the final image direction. Especially when using high-magnification lenses, even the slightest bit of vibration during installation will be amplified. You can't expect the positioning accuracy of the head itself to compensate for the wobble caused by the tripod, adapter, or screws not being tightened properly. To put it bluntly, if the chassis is unstable, the camera's built-in image stabilization function cannot be saved.

With the addition of adapters, the properties of the entire structure change

People often confuse the flat bottom, bowl mouth, and camera tripod threads. In fact, they belong to completely different systems, and there are differences in the mouths of bowls of different sizes. Even if the threads meet the ISO 1222:2010 standard, it only means that the screw can be screwed in, which does not mean that there must be no problem with load-bearing and stability.
When you use an adapter plate to make up the interface, the weight, thickness, and rigidity of the plate itself are added, and it often raises the overall center of gravity. The bottom screw holes can be aligned, which only completes the first step of installation. Whether the equipment will spin and whether the tripod will be resistant to tipping over are all issues that need to be considered separately.
The movement space of the equipment must be considered “full travel”. The fact that the device did not touch the tripod at a certain angle does not mean that it will not bump during the entire process of horizontal rotation or pitch up and down. You need to take into account the movement of the shield, various accessories, and cables to prevent them from fighting, tearing the cables, or getting stuck. If the load is too heavy or the center of gravity is too high, which limits the pitch angle, this limitation must be taken into account when designing the solution.

How high can it be erected depends on the conditions on site

How a tripod is set up on site depends on its highest/lowest height, leg tube deployment range, leveling method, and whether it uses foot pads or foot spikes. In addition, the operating temperature suitable for the tripod must also be commensurate with the on-site environment. When making temporary deployments, you also face the risks of uneven ground, whether someone will bump into it, whether cables will trip, and even when the equipment is unattended. Therefore, the experience of installing equipment fixed to the wall will not work here.
A truly reliable support is provided that the ground is stable and the legs of the tripod are fully extended as designed. Accessories such as extension frames, floor mats, and foot studs must also be used according to the rules. Only by leveling the tripod, installing the gimbal and load, and finally locking the quick-release plate, sliding clamp and anti-detachment device to the correct position can this combination be considered truly usable.
In the final analysis, to verify whether a set of plans will work, we must take the "actual full load" to test the "actual support configuration" head-to-head ". If a set of candidate schemes only gives you a cold "maximum load-bearing" data, but does not even have the center of gravity limit, the maximum torque allowed or the dynamic test conditions, then whether this set of electric pan-tilt and tripod will be built or not will have to be a big question mark.

Related Articles

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. Part of the tracking is necessary to ensure SEO effectiveness,
By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept