Blue Icon (Tianjin) Technology Co., Ltd.
Blue Icon (Tianjin) Technology Co., Ltd.

Products

Contact Us

Outdoor Security: Ball Gimbal vs. Electric Gimbal Tripod Comparison

When conducting large-scale outdoor security monitoring, people often compare ordinary ball gimbals with all-round electric gimbals. What is the most fundamental difference between these two? To put it simply and roughly: one is simply locked by you using both hands to break the angle and turn the knob; the other is a “heavy armor” with a motor that you can sit in the monitoring room and push the joystick to control it to spin around. For this heavy electric equipment, setting it up on a tripod is only the first step in the long march. The whole thing is a bit off-center, how big the windward side is, and whether the cables that follow the device will break ——these are all tough bones that must be worked on a little bit when choosing a model.

image.png

You have to settle accounts separately for cameras and sports platforms

The spherical gimbal we usually use for photography is, in the final analysis, a manually adjustable stand. But electric gimbals used in security or industry are a completely different species, and people have mechanical transmission devices installed in their stomachs. You need to build a complete system, and buying a gimbal is useless. You also need to install a power supply, controller (or computer background software), communication cables and a bunch of mounting hardware. If you compare it to an old-fashioned 3D photography gimbal at this time, you are really on the wrong set —— no matter how smooth the wheelbase of the manual gimbal is, it cannot be transformed into a remote control function.
In an external electric gimbal system, we generally refer to the camera, lens, and external protective cover as “load”. These loads are carried directly on the sports platform. You have to understand that the gimbal only nods up and down and shakes its head left and right. As for zooming in and out of the picture, that is all the work of the camera and lens themselves. So when purchasing, the camera and gimbal must be purchased separately, and when they are bought back, their physical interfaces and communication protocols must match the code.
To give you a simple analogy, the dual-chamber protective cover on the market now looks good, allowing you to plug a camera into one side and add an infrared or laser fill light on the other side. But you have to understand that the cover is just an empty shell after you buy it. Don't think that if you pay for a cover, all the fancy equipment inside will be provided to you.

How much heavy load can be carried depends entirely on how you load it

When the gimbal rotates, there are quite a few parts that sway with it: in addition to the camera lens, there is also a protective cover, a bunch of mounting screws and clips, and wires connected to it. How far the center of gravity of the device is from the axis of rotation directly determines how much force (i.e., torque) the motor inside must exert to pull; and how this weight is normally distributed directly affects whether the gimbal will shiver when starting and braking suddenly.“ Mounting on top ”and “hanging on the side”, the stress conditions are worlds apart. Therefore, never use the weight limit of the side mount to apply the top mount.
Outdoors, those large protective covers and combination brackets are like a sail for a ride. Even if two devices weigh the same weight on a scale, as long as they are different shapes and have the wrong center of gravity, the force of the wind outside is completely different. Mounting the bracket on the side does make it pleasing to pull the center of gravity down to bring it closer to the pitch axis; but whether it can do this depends on whether the hole position can be aligned, whether the platform width is sufficient, and whether the motor torque can be controlled.
Take the BIT-PT850 model for example. If it is top-mounted, the manufacturer's nominal weight is that it can carry a maximum of 50 kilograms. But when it was pressed with a 50 kg weight, its range of up and down nods got stuck between -45° and 45°. If you want it to do a -80° to 80° high-angle squat looking up, the load has to be reduced to under 26 kg. Therefore, when comparing parameters, the two indicators “load bearing” and “elevation angle” must be tied together, and some margin must be left for the rotation speed. Wanting to be fully loaded, wanting to have a full angle, and expecting it to turn very fast——Reality point, don't dream.

After a long turn, we still need to be able to accurately find the original position

Security monitoring often requires fixed-point cruising or returning to a saved preset position with one click. Whether this action can be performed well depends entirely on the foundation of the equipment itself. The BIT-PT850 comes with this feature and supports real-time location backhaul and absolute location positioning. Remember, the market is full of gimbals with electric motors, but that doesn't mean that just picking any one has this kind of brain “referring to whichever one hits”.
Especially when staring at a target with that cannon barrel telephoto lens, even if the bracket vibrates as much as a hair, the image will shake you dizzy when it comes back. At this time, if you want to see whether the gimbal is accurate, you must separate and review its positioning accuracy, repeated positioning accuracy, and the feedback (mechanical clearance) in the gears one by one. The weak knot in the entire base and bracket, coupled with the actual weight of the mount, will affect the final sight point. Want to know if it's reliable? The most direct way is to hook up a real device and run a few laps of the actual trajectory to try it out, especially to see if it shakes the moment it turns in the opposite direction and stops at the command position.

Control commands and cross-axis routing must be checked separately

The BIT-PT850 explicitly states that it supports a level of 360° infinite continuous rotation. If you read someone else's manual and only vaguely state “supports 360° horizontal range”, you must ask more questions: Can it keep spinning in one direction, or does it get stuck after just one turn and have to be returned? To achieve infinite rotation, not only must the optomechanical structure allow it, but it must also be buried inside “conductive slip rings” to transition signals and provide power. And you have to calculate whether the number of channels reserved in the slip ring is enough for you to pass through the power cord, video cord and data cord. If you buy a limit gimbal that will get stuck, then honestly calculate the cable allowance and curvature, leave enough room for the cable to expand and contract, and don't tear the cable off with just a turn of your head.
In addition, the signal controlling the rotation of the gimbal and the video signal transmitted by the camera are completely different teams, and compatibility scores are checked. The interfaces, protocols, baud rates at both ends of your console and gimbal, even if they are firmware versions, must be able to talk to each other. The fact that the screen is up only proves that the video cable is working; if you want to control the zooming of the lens alone, the control cable must be penetrated all the way and plugged directly into the lens.

Tripods and outdoor accessories together determine the limits of installation

When you are about to set up such a bulky electric gimbal on a tripod, don't forget that these legs not only have to carry the camera, but also the big iron lump of the gimbal, plus a bunch of adapters. How to connect the base, whether the adapter plate is thick, how to prevent deflection, whether the overall center of gravity will float, whether it will fall over at the slightest touch... This has become an ecosystem that affects the entire body. The “maximum load-bearing” label on the tripod leg can never replace the true pressure-bearing capacity of the gimbal chassis or quick-release plate.
For each adapter plate you add to it, the increased thickness, its dead weight, and the few centimeters that push the center of gravity up must be combined with the interface dimensions to make a general calculation. In addition, setting up temporary controls outdoors is full of pitfalls: the ground is full of potholes, the shelves cannot be opened, the wind is frighteningly strong, passers-by bump into it without paying attention, cables are pulled around and people trip, and there are also safety hazards such as equipment being thrown there and no one is paying attention. The same tripod will have different stability when changing the venue. Don't take your previous experience of directly driving expansion screws to fix it to the wall and foolishly make a hard cover on the tripod deployment.
If this set of things has to be exposed to the wind and sun for a long time in the wilderness, not only the gimbal itself, but also the protective cover, all the connection heads, the power box and the exposed cables, every small part must be able to withstand the local extreme cold and heat, heavy rain and snow, and even corrosion. Don't just stare at the waterproof and dustproof rating of the gimbal body. No matter how strong it is, it can't save those fragile parts next to it that are leaking.

Related Articles

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. Part of the tracking is necessary to ensure SEO effectiveness,
By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept